실용적인 Collins KWM-2A 디지털 표시기
KWM-2A Frequency Digital Scale
Digital Display for DXer
DXer를 위한 DIGITAL 표시장치
MADE IN EARTH
- KWM-2A / KWM-2 (70K-2 VFO Only) - The Frequency Display is a practical この周波数のインジケータは、実用的である。 - 3 Digit LED FND Display - LSB/USB Automatic Change - USB and LSB is the frequency interval of 2.7kHz. - Use the power of the KWM-2A (AC5.8~6.3V 0.09A) - Compact Size : 50 x 24 x 90mm - Does not seem out of line (Do not hate.) - Easy Install : 1 minute OK ! (Attached to the upper cover) 簡単なインストール 1分 OK ! - Accuracy : X-tal Tolerance ±1digit (Full scale ±2digit ) - Structure : VFO(70K-2 Permeability Tuned Oscillator) frequency conversion and, BFO frequency by as much as ± Transceiver in a manner that displays some of the state according to Deviation may occur. - 75S and S-line series that also can be used to connect a difference. - 75SなどのS - lineシリーズにも使用が可能、1つの接続方法が異なります。
Caution ! Do not open the high voltage inside.
|
|
- Linearity is not completely accurate mechanical display shows the frequency of VFO. - 직선성이 완전하지 않는 기계식 VFO의 주파수를 정확하게 표시해 줍니다. - 直線性が完全ではない機械式VFOの周波数を正確に表示しています。
|
Analog and digital display is accurate to enjoy.
アナログを楽しみながら、正確なデジタル表示をする
Compact Size / Easy Install (1 minute OK !) / Anyone can do it.
Operating immediately available.
누구나 쉽게 1분이면 선이 노출 되지 않게 설치 (트랜시버 분해 하지 않고 설치) !!!
조작 버튼 없음 (콘넥터 Plug J17/J18에만 꽂으면 끝)
設置 1分 OK !
USD $137.00
※ 韓國內는 \153,000(송료 포함)
(일시 품절)
Worldwide EMS 3~5days Arrive
설치 방법
1. 전원플러그를 빼고, 윗덮게를 연다. 2. 손잡이 구멍으로 케이블 J17과 J18을 위에서 아래쪽으로 끼운다. 3. 그림을 참조하여 손잡이 구멍 좌우의 3mm구멍에 볼트 2개로 KFD-3를 고정시킨다. 4. 케이블을 그림과 같이 뚜껑 안쪽에서 좌, 뒤쪽으로 고정시킨다. 6. J17플러그는 은 내부의 J17에 꽂는다.(기존 점퍼 플러그는 빼 놓는다.) 7. J18케이블은 좌측 뒤 구멍 으로 내어서 EXT VFO 짹에 꽂는다. 위쪽에서 배선이 보이지 않도록 설치 끝
설명서 필요 없음. 바로 사용 (LSB/USB는 자동으로 바뀜)
|